71 PMP Exam Prep Questions on PMP Quality Management

Hey guys! If you are looking forward a new study method to prepare well for your PMP examination that here is a perfect place for you to practice and learn the concepts include in your materials. In this article, there are 71 PMP Exam Prep Questions to refresh your exam experience, these 71 Pmp exam questions below concentrate on the concepts and information of PMP quality management, which is one of areas included in your real test that you need to learn before taking the exam. Indeed, in your Pmp exam, you need to score 106 out of 200 questions to pass successfully exam. One perfect tip for you that you should read carefully the requirement of each questions before answering, in your real exam, you only have 4 hours to complete 200 multi – questions, but at our site you have a lot of time to read and remember the concept. Let’s enjoy us to discover that to add more confidence for passing your real exam, and don’t forget to leave your comment below if you have any problems. Good luck!

Follow the links below to practice more:
12 PMP Practice Exams on Ch.12 Procurement Management From PMBOK 5th Edition
51 Free PMP Practice Exam on Project Management Knowledge Areas
42 PMP Exam Sample Questions on PMP Process Definition

71 PMP Exam Prep Questions on PMP Quality Management - Page 1

Difference between Precision and Accuracy?

Conceived Total Quality Management (TQM), which has 14 principles of management.
Precision relates to consistency of measurement. Accuracy addresses the correctness of measurement, alignment with target.
Addresses the correctness of measurement, alignment with target
Process of auditing the quality requirements and the results from quality control measurements to ensure that appropriate quality standards and operational definitions are used.

Likelihood that something will occur. The sum of all probabilities equals 100% or 1.0.

Probabilities
Gold Plating
Quality
Variable

Proactive approach to development that makes continuous improvement throughout the process

Kaizen
Quality
Variable
Precision

What does quality control test?

The process output
Test every item
One choice excludes any other choices
Accepted or general rule of thumb

Affinity diagrams

Are similar to mind maps, graphically elaborate the details of an idea or problem
are used to depict a goal and the steps required to attain that goal
Concerned with the stability or predictability of the product.
is a cumulative histogram you can use to see where the key problems lie.

He invented control chart techniques and the Plan-Do-Check-Act cycle. He developed statistical tools to determine when a corrective action must be applied to a process.

Checklists
Grade
Heuristic
Shewhart

Used to ensure that everything which should be done in a process, has been completed as planned. Can eliminate defects, which improves quality.

Shewhart
Checklists
Check Sheets
Heuristic

Relates to consistency of measurement

Kaizen
Heuristic
Precision
Checklists

Systematic diagrams, WBS, OBS, RBS

Matrix Diagrams
Affinity diagrams
Scatter Diagram
Tree Diagrams

Concerned with the stability or predictability of the product.

Quality
Grade
Attribute
Kaizen

Tools you can use to capture and categorize quantitative or qualitative data. Can use to indicate each time a process failed over a specific period of time.

Zero defects
Checklists
Shewhart
Check Sheets

Quality control measurements, validated changes, validated deliverables, organizational process assets updates, change requests, PM plan updates, project document updates.

Perform Quality Control Outputs
Perform Quality Assurance
What does quality control test?
Perform Quality Assurance Outputs

Prioritization Matrices

Minimum value used to determine if a process is in specification
The outcomes of processes are separate from one another.
Key issues and potential alternatives that need to be ranked for implementation.
are used to depict a goal and the steps required to attain that goal

is a cumulative histogram you can use to see where the key problems lie.

Matrix Diagrams
Scatter Diagram
Pareto Diagram
Tree Diagrams

Looking for the point where the benefits or revenue to be received from improving quality equals the incremental cost to achieve that quality. Added attention to quality not necessarily value added, when point is reached should stop trying to improve quality.

Matrix Diagrams
Process Analysis
Marginal Analysis
Affinity diagrams

Process of auditing the quality requirements and the results from quality control measurements to ensure that appropriate quality standards and operational definitions are used.

Perform Quality Assurance Outputs
Quality Assurance Tools
Perform Quality Control Outputs
Perform Quality Assurance

Plan Quality Management

Concerned with the stability or predictability of the product.
Precision relates to consistency of measurement. Accuracy addresses the correctness of measurement, alignment with target.
What is the quality improvement cycle in the PM discipline?
The process of identifying quality requirements and/or standards for the project and its deliverables, and documenting how the project will demonstrate compliance with relevant quality requirements.

Upper Specification Limit (USL)?

Is the maximum value used to determine if a process is in control.
Maximum value used to determine if a process is in specification
Minimum value used to determine if a process is in specification
Is the minimum value used to determine if a process is in control.

Rolled Throughput Yield (RTY)?

The probability that a unit can pass through a process without defects. RTY = Y1 Y2 Y3 Y4 ...etc.
That what a company produces should be 99.9997% error free.
Maximum value used to determine if a process is in specification
Minimum value used to determine if a process is in specification

(P-O)/6

Scatter Diagram
Prioritization Matrices
standard deviation formula
Sample Testing

Both focus on items such as customer satisfaction, management responsibilities, continuous improvement, and prevention over inspection.

Quality Management Plan
What does quality control test?
Project Management and Quality Management Similarities
Perform Quality Assurance

Team Members: own work; PM: Quality standards of the Project; Sr. Management: Standards of the company

The Process Improvement should consider?
What are the quality roles of team members, PM, and Senior management?
What are the main standard of deviations?
What is the standard for 6 sigma?

Addresses the correctness of measurement, alignment with target

Shewhart
Kaizen
Quality
Accuracy

Grade

Relates to consistency of measurement
Concerned with the characteristics of the product.
One choice excludes any other choices
Accepted or general rule of thumb

A specific measurement being recorded (a unit of measurement), for example, square feet, inches, meters

Heuristic
Attribute
Shewhart
Grade

What is the standard for 6 sigma?

What is the quality improvement cycle in the PM discipline?
Relates to consistency of measurement
That what a company produces should be 99.9997% error free.
The outcomes of processes are separate from one another.

Organizational process assets updates, change requests, PM plan updates, Project document updates

Perform Quality Assurance Outputs
Perform Quality Assurance
Quality Assurance Tools
Perform Quality Control Outputs

Process boundariesProcess configurationProcess metricsImproved performance targets

Quality Management Plan
The Process Improvement should consider?
Examples of Process Improvement
Process Analysis

Lower control limit (LCL)?

Is the minimum value used to determine if a process is in control.
The outcomes of processes are separate from one another.
Concerned with the characteristics of the product.
Maximum value used to determine if a process is in specification

Difference between grade and quality

The process of identifying quality requirements and/or standards for the project and its deliverables, and documenting how the project will demonstrate compliance with relevant quality requirements.
Concerned with the stability or predictability of the product.
Is a general characteristic or property, such as capacity and height.
Grade: characteristics of the product. Quality: stability or predictability of the product or how well something works

Design of Experiments (DOE)

Is the maximum value used to determine if a process is in control.
Maximum value used to determine if a process is in specification
Is the minimum value used to determine if a process is in control.
A statistical process used to determine the factors that an influence variables associated with process or product.

The cost of conforming (prevention) or not conforming (inspection) to continuous improvement. Pay now or pay later.

What is the standard for 6 sigma?
What does quality control test?
What is the cost of quality?
Mutual Exclusivity

Conceived Total Quality Management (TQM), which has 14 principles of management.

W. Edwards Deming
Population Testing
Gold Plating
Zero defects

Is the maximum value used to determine if a process is in control.

Control Chart
Upper control limit (UCL)?
Lower control limit (LCL)?
Lower specification limit (LSL)?

Seven basic tools of quality: CCFRHPS Take a Check Collection Form and Run to Hyderabad Public School.

are used to depict a goal and the steps required to attain that goal
Systematic diagrams, WBS, OBS, RBS
Concerned with the characteristics of the product.
Cause and Effect Diagrams, Check Sheets (checklists) , Flow charting, Run Chart, Histogram, Pareto Chart, Scatter Diagram

71 PMP Exam Prep Questions on PMP Quality Management